Principle
Microdermabrasion is a cosmetic technique that uses a mechanical medium for exfoliation to remove the outermost layer of dead skin cells from the epidermis. It is a non-invasive treatment procedure. The major components of the system are the vacuum pump, the compressor, the metal hand piece, and the tubing interlink. The patented operator controlled hand piece is made from stainless steel with a titanium venturi valve and is fitted with a macralon tip with an oval aperture to allow air and crystals to flow through. This tip is changed between each procedure. Plastic tubing connects the hand piece to the system's two crystal bottles. When the hand piece is placed in full contact with the skin, a vacuum is created, thereby activating the system's crystal flow. This vacuum may be visually confirmed by watching crystals agitate in the clean container. The airflow system begins at the compressors intake port, then passes through the clean crystal container and carries the microcrystals through the tubing to the handpiece.
Applications:
1.improve skin tone and elasticity and smooth scars and acne.
2.Exfoliators
3.Skin Rejuvenation
4.Skin Revitalizer
Specification:
VOLTAGE: 110 VOLT/220 VOLT
FREQUENCY: 60 /50HZ
Power: 180W
FUSES: 3 x 5 AMP
POS. AIR PRESSURE: 2.5 BAR
VACUUM PRESSURE: 0 to 60 cmHg
CLASS: IEC – 601 – 1(1)
Packing size: 63*39*40 cm
Weight: 25 kg
Enquire this product